MIPI UVC for Windows

This is a cry for help.


We are a start-up company that needs help with hardware. Here's what we have:
- An OmniVision sensor (OV9714)
- An Altera board that reads the signals off of that sensor
- A Windows GUI that expects a UVC device


We had some luck with an Altera board feeding into an FX3 Cyclone III (to get a USB 3.0 throughput) - this solution was done by a contractor and there were some considerable flaws in the implementation (high noise levels, interlaced image (!), overexposed/underexposed pixels).


Here's what we are looking for:
- Have that MIPI sensor recognized as a "standard" USB Video Capture device under Windows. Nothing fancy here - just a standard set of features like grabbing a frame, setting a focus, exposure, and a like
- A desire to VSYNC it to an "external" projection device (basically an HDMI or just plain VGA display)
- For an initial phase we are looking for a 640x400 at 75FPS RGB (or BGR) mode via USB 2.0
- For the next phase we are looking for a USB 3.0 1280x800 at 120FPS RGB/BGR/YUV/HSV support


I was wondering if anyone in this community would be interested in working with us? As is with any start-up the timing is "yesterday"


Thanks