No messages in Modelsim [waveview & messageviewer]
I used to have messageindicators in the wave view of Modelsim. On my new computer they're gone. In my search for a solution I found that the messageviewer is empty. In my code i use multiple report...
View ArticleQuartus II ver 13 - no devices available after installation
I ran a new installation of QII V13 on my machine, and included the installation of all device types. After installation, the device files are in C:\altera\13.0sp1\quartus\common\devinfo as expected....
View Articleincompatible type for argument 2 of '__builtin_stwio'
I'm trying to write to memory using the IOWR_32DIRECT function, however I'm receiving an error complaining about an incompatible type. I'll have to admit that it's difficult to find the specifics on...
View Articlemax v dev kit board test
Hi - I have a Max V development kit that I am trying to learn how to use. It has been a long time since I have worked with digital hardware so forgive my stupidity. Anyway... I am just going through...
View Articlebsp-editor warning 13.0sp1
I am trying to create the preloader using the instructions taught in the "Developing Software for an ARM based SoC FPGA" exercise manual (Exercise 1a). After running the Embedded_Command_Shell.bat,...
View ArticleLVDS clock and data signals, interfacing to LVDS DAC
Hello, I have designed a system for the generation of signals to be reconstructed with an ADC evaluation module (TSW30SH84EVM form TI). I am currently using a Terasic TR4 board, based on STRATIXIV...
View ArticleAltPll Dynamic phase shift state machine
Hi everyone, I am trying to implement a design for generating a dynamic phase shift clock output. I am using cyclone III device for my design. I have gone through the documentation to implement dynamic...
View ArticleInterval timer problem
Hello. IÂ’ve got a problem with simple interrupt from interval timer in uC/OS-II System frequency is 75Mhz. There are PIO and timer. It makes strobe. Duration 10 ms. Here it is: Code: // global...
View ArticleHow to split conduit inside Qsys
Hi, I need to connect a 4-channel transceiver and Stratix-V PCIe Hard IP core to a reconfiguration controller inside Qsys. That requires 10 channels: 8 from transceiver and 2 from PCIe. Those channels...
View ArticleNios II Dev Tools don't create HEX file
I have a NIOS II project that started out with the "Hello World" example. I'm trying to load this into an internal RAM/ROM block in QSYS (Quartus v12.1) and have the program automatically start after...
View ArticleBit Stream wont load
Hi I have a board that has two EP3C16's and a EPCS16 to hold the bit stream. I am trying to program using the AS mode with the USB Byte blaster. I have set the first device as Master active (MSEL 010)...
View Articlelicensing issues
How do I load two license files into my Quartus II software. Under License Setup I can select my license file, but I need to select two of them. (One gives me access to non time limited stuff, and one...
View ArticleALTSHIFT_TAPS Usage
Using the ALTSHIFT_TAPS with MLABS selected for the Cyclone V it looks like you get an output every three clocks since that is the minimum distance between taps. How about getting an output every clock...
View ArticleModular SGDMA
Hi, I am trying to make use of the Modular SGDMA IP with QSYS. Will QSYS generate the correct write/read commands in the test bench file, altpcietb_bfm_driver.v, to properly test the DMA? I'm having...
View Articlemodelsim wave view corrupt when detached
I am having problems with the wave view in modelsim version 6.6c (quartus 10.1) on XP 32 bit. Sometimes the section of the window that displays the waveforms does not update. Instead i see what was...
View ArticleLinux installation issues
I downloaded the Linux .tar file for the Quartus II software for my Digital Design class. Everything downloaded okay and I ran the script to install it but it is not appearing in my applications lists...
View ArticleProper way to set_multicycle_path register enable fanout in TimeQuest
I've been trying to use set_multicycle_path from a register enable, but I can't seem to get it to catch all of my paths: This fails: Code: set mc_dec_re_group [get_fanouts [get_pins...
View ArticleUSB Example
Hello all, I am using the stratix IV DE4 development board and am having some troubles with the USB example project shipped on the CD, the usb chip is the isp1761. The project compiles and nios2 run...
View Articlemegawizard university program
I'm using Quartus 12.1 & have installed the university program .exe, but when i go to megawizard there is no university program of modules. I am using a DE-nano & in the manual they say I can...
View ArticleDifference between jam algorithm v33 and v59
In my company, we succeded to port Jam STAPL Player to DSP2812 to implement PLD upgrade years ago when using quartus 2.2. We did in these way: First, we created JEDEC STAPL Format(.jam) file by .pof...
View Article