Hello,
this is the first time I use QuartusII: I'm a newbie with FPGA design.
I have installed the Web Edition version 13.1 on a WindowsXP Pro 32bit (Athlon XP+2800, 2GB RAM + 2GB free hard disk space).
When I open the project and select Processing->Start Compilation the "analysis and synthesis" completes without problems but the "Fitter (Place and Route) stops every time at 90% when the "post fitting delay annotation" is running and this error windows is displayed.
The error says:
*** Fatal Error: Unrecognized Windows Exception
Module: quartus_fit.exe
Stack Trace:
0x13243: tbb::internal::generic_scheduler::get_task + 0x23
0x15020: tbb::internal::custom_scheduler<tbb::internal::Int elSchedulerTraits>::local_wait_for_all + 0x220
0x56eae: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x1b0e
0x14fe6: tbb::internal::custom_scheduler<tbb::internal::Int elSchedulerTraits>::local_wait_for_all + 0x1e6
0x56836: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x1496
0x54117: TIS_RE_DELAY_TREE_NETLIST::TIS_RE_DELAY_TREE_NETLI ST + 0x4e7
0xa6a4: TAPI_ROOT_IMPL::annotate_atom_netlists_post_fit + 0x234
0xc22e: TAPI_ROOT_IMPL::annotate_all_iterms + 0xae
0x71a8: TAPI_ROOT_IMPL::start + 0x368
0x7994: TAPI_ROOT_IMPL::start + 0x64
0xa4333: FITCC_TDC_UTILITY::initialize_dat + 0x2b3
0xa482d: FITCC_TDC_UTILITY::setup_tdc_utility + 0x9d
0xa6552: FITCC_TDC_UTILITY::FITCC_TDC_UTILITY + 0x1d2
0x38f7e: FITCC_ENV::get_tdc_utility_or_create_if_necessary + 0x30e
0x1c12a6: FSAC_AUTO_DELAY_CHAIN_OP::work_new + 0x1c6
0x1abe4f: FSAC_DELAY_CHAIN_OP::work + 0x22f
0x7db9: FCUDA_EXPERT::fitter_post_operations + 0x1b9
0x404ad: FITCC_EXPERT::fitter_post_operations + 0x1ad
0x41e8e: FITCC_EXPERT::invoke_fitter + 0x88e
0x5052: _fcuda_execute + 0x1f2
0xa52c: fmain_start + 0x6ac
0(continued in attached text file)
This error happens also with project examples on the DE0 board CD from Terasic so this isn't a problem caused by my project but it's caused by my computer (hardware requirements or Windows configuration).
Can anyone help me?
Best regards.
this is the first time I use QuartusII: I'm a newbie with FPGA design.
I have installed the Web Edition version 13.1 on a WindowsXP Pro 32bit (Athlon XP+2800, 2GB RAM + 2GB free hard disk space).
When I open the project and select Processing->Start Compilation the "analysis and synthesis" completes without problems but the "Fitter (Place and Route) stops every time at 90% when the "post fitting delay annotation" is running and this error windows is displayed.
The error says:
*** Fatal Error: Unrecognized Windows Exception
Module: quartus_fit.exe
Stack Trace:
0x13243: tbb::internal::generic_scheduler::get_task + 0x23
0x15020: tbb::internal::custom_scheduler<tbb::internal::Int elSchedulerTraits>::local_wait_for_all + 0x220
0x56eae: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x1b0e
0x14fe6: tbb::internal::custom_scheduler<tbb::internal::Int elSchedulerTraits>::local_wait_for_all + 0x1e6
0x56836: TIS_RE_DELAY_TREE_NETLIST::is_itt_starting_point + 0x1496
0x54117: TIS_RE_DELAY_TREE_NETLIST::TIS_RE_DELAY_TREE_NETLI ST + 0x4e7
0xa6a4: TAPI_ROOT_IMPL::annotate_atom_netlists_post_fit + 0x234
0xc22e: TAPI_ROOT_IMPL::annotate_all_iterms + 0xae
0x71a8: TAPI_ROOT_IMPL::start + 0x368
0x7994: TAPI_ROOT_IMPL::start + 0x64
0xa4333: FITCC_TDC_UTILITY::initialize_dat + 0x2b3
0xa482d: FITCC_TDC_UTILITY::setup_tdc_utility + 0x9d
0xa6552: FITCC_TDC_UTILITY::FITCC_TDC_UTILITY + 0x1d2
0x38f7e: FITCC_ENV::get_tdc_utility_or_create_if_necessary + 0x30e
0x1c12a6: FSAC_AUTO_DELAY_CHAIN_OP::work_new + 0x1c6
0x1abe4f: FSAC_DELAY_CHAIN_OP::work + 0x22f
0x7db9: FCUDA_EXPERT::fitter_post_operations + 0x1b9
0x404ad: FITCC_EXPERT::fitter_post_operations + 0x1ad
0x41e8e: FITCC_EXPERT::invoke_fitter + 0x88e
0x5052: _fcuda_execute + 0x1f2
0xa52c: fmain_start + 0x6ac
0(continued in attached text file)
This error happens also with project examples on the DE0 board CD from Terasic so this isn't a problem caused by my project but it's caused by my computer (hardware requirements or Windows configuration).
Can anyone help me?
Best regards.